Super Eco Ultrasonic carburettor cleaner concentrate provides superb cleaning performance at low temperatures, saving time and reducing energy consumption. The solution is a micro-emulsion capable of solubilising oily, hydrophobic substances in a bi-phase composition, making it highly effective at cleaning surfaces. This removes the need for chlorinated solvents, hydrocarbon solvents and high pH caustic solutions. It is very effective at a lower working temperature, between 15°C and 45°C for lower energy costs and short heat up time.

Eco Ultrasonic Carburettor Cleaner is a pH neutral and environmentally friendly solution, specially made for use in ultrasonic baths and works at a lower temperatures.

Eco Ultrasonic Carburettor cleaner Super Concentrate - 40:1 concentrate (1 Ltr bottle makes 40 Ltr of working solution))

The solution has been specially formulated to remove oil residues, grease, general dirt, carbon, aluminium oxidation etc. from motor parts including carburettors, fuel injectors, heat exchangers etc. Built-in corrosion inhibitors make it safe to use on all metals and it will not damage or darken components.

Working temperature of the ultrasonic bath should be between 15°C and 45°C. Do not use above 55°C as the micro emulsion will begin to break down and surfactants will deposit on the surface you are trying to clean. After cleaning rinse with water and wipe dry. It works well in hard or soft water.

The solution is non hazardous for disposal (ie. it can go down the drain) but please be mindful of the contamination from what you are cleaning. If the level of soiling is high please check your local disposal regulations.

The fluid can be used many times until it looks dirty. There's no specific rule about when to change the fluid, but the idea of an ultrasonic cleaner is for deep and thorough cleaning. If your fluid looks like pea soup, it's time to change it!

• Biodegradable - friendly to the environment
• Non corrosive to metals and aluminium
• Neutral pH
• Can be used in hard or soft water
• Low working temperature optimum is 40°C
• Non hazardous
• Removes petrol residue
• Brightens alloy castings
• 40:1 concentrate (1 Ltr makes 40 Ltr)